Me gusta  talcum filler masterbatch manufacturers

Compartir
Tengas una GS 500 o no este es el lugar idóneo para presentar tu moto. Ya sabes, ponla guapa, hazle muchas fotos, y a presumir de montura!!!!

talcum filler masterbatch manufacturers

Notapor xxsxx4v » 29 May 2018, 13:52

Manufacturing customized talc filler masterbatch for injection molding and extrusion molding, we are well-known among those famous such suppliers in China, welcome to purchase talc filler masterbatch for injection molding and extrusion molding from us.
Product Description:
Talc filler masterbatch contains talcum, carrier resin and some additives. It’s suitable for film blowing, extrusion molding, injection molding, etc. This product has dispersion very fine, free of agglomeration and bring for the end product more improve printability, smoothness, hardness, stiffness, antiblock, etc. It is mainly used for PP, PE plastic sheet and plastic injection and EPE foaming.
Product Data:
NameTalc filler masterbatch for injection molding and EPE foaming
FillerTalcum
Mesh1250~1500
Filler content≤75%
CarrierPP/PE
MFI ( g/10min )2~15
Density ( g/cm3)1.6~1.7
Moisture≤0.01%
Adding ration5~50%
ApplicationInjection molding, EPE foaming, etc.
Payment termsTT , LC etc.
Delivery timeLess than 7 days
Packing25Kg per bag. compound woven bags with plastic inner bag, or customized
MOQ1 ton
StorageKeep the products in a dry, ventilated place, Note to avoid moisture, insolation, rain and breakage in transportation.
Product Advantages:
1.The oil absorption of the powder is low, good fluidity and dispersion, good surface finishes of the products.
2.Light Specific gravity, high transparent and brightness, the refractive index close to the PP、PE
3.The high adding ratio is more than 50%.
4.Good dispersion, do not separate out.
5.Improve the impact resistance, thermal conductivity and abrasive resistance of the product. Reduce the heat shrinkable property, improve the strength and toughness of the product.
6.Improve the strength and geometric stability of the product, avoid or reduce the shrinkage of injection molding
Application:
Model No.Application
H-1Used for blow film/extrusion, such as shopping bags, hollow sheet.
H-8Used for blow film/blow molding/extrusion, such as
H-10EPE foaming and also customized
Our Company:
Established in 2000, Zibo Holy Masterbatch Co.,Ltd is one of the leading plastic masterbatch manufacturer in China, located in Eastern Chemical Zone of Zibo, Shandong, China. The premises cover production capacity of 50,000 tons annually, 11,000 square meters, 10 high intelligent and automatic production lines. The main products include the filler masterbatch, desiccant masterbatch and color masterbatch.
Our Products:
Certification:
Warm prompt:
If you need more information, please contact us directly.talcum filler masterbatch manufacturers
website:http://www.zbholy.com/filler-masterbatch/talc-filler-masterbatch/
xxsxx4v
Gesero Eventual
Gesero Eventual
 
Mensajes: 10
Registrado: 29 May 2018, 13:47
Montura: xxsxx4v

Volver a Nuestras Monturas

¿Quién está conectado?

Usuarios navegando por este Foro: Google [Bot] y 1 invitado